Knowledge

Pre-start inspection: 1. Check whether there are any foreign objects on and around the guide belt, whether the air pressure and steam water are normal

Pre-startup inspection 1. Check the equipment: Before starting the machine, check whether there are any foreign objects on and around the guide belt,

Reasons for complicated operation 1. Machine structure and working principle: The Elliptical Printing Machine consists of a frame, a transmission syst

Plate alignment mode: used to adjust the relative position of the printing head and the platen to ensure the accuracy of the printed pattern. Platen p

1. Understand the structure and working principle of the machine The Elliptical Printing Machine consists of a frame, a printing screen, a scraper, an

1. Broken lines and stripes appear in the printed image: The reason may be that the nozzle needle is broken or the ink hole is blocked. The solution i

1. Cutting quality problems: If there is uneven cutting, edge burrs or cutting faults, it may be caused by blade wear, too fast cutting speed, insuffi

1. Regular cleaning and lubrication: Many metal parts inside the cutting machine need to be cleaned regularly to prevent rust. At the same time, the m

1. Automatic cleaning: Power on the machine and clean the printhead through the automatic cleaning function of the printer properties. This is the sim

1. There are obvious broken lines and stripes in the printed image: Reason: The ink head is broken. As long as one ink hole of the pressure point nozz

1. Daily maintenance content: Printing platform inspection: Keep the printing platform free of foreign matter to avoid scratching and damaging the noz

1. Environmental maintenance: Keep the indoor environment dry and clean, avoid dust and smoke. Maintain constant temperature and humidity, generally t