How to maintain digital printing machine in winter

Aug 04, 2023

Leave a message

1. The temperature of the working environment is very important to the digital printing machine. If the temperature is too low, the digital printing machine will have oblique spraying, ink flying, and blurred printing.

When the user finds that the image of the test strip is blurred, he can use an electric heating fan or a hair dryer to heat up the nozzle to avoid such problems when the digital printing machine is working.

In addition, before using the digital printing machine, the user should turn on the air conditioner or electric fan in advance to preheat the working environment of the digital printing machine. The temperature is recommended to be kept at 15°C-30°C.

Make the digital printing machine in the best working condition, which not only improves the work efficiency, but also has better printing effect.

2. In addition, static electricity is easily generated in winter, especially in rooms with air conditioning, the air is extremely dry, which is a hotbed for static electricity. Excessive static electricity will increase the working loss of the digital printing machine and affect the life of the nozzle.

Therefore, when the user turns on the air conditioner, it is recommended to turn on the humidifier at the same time to increase the air humidity. It is recommended to keep the humidity at 35%-65%. The humidifier should be kept away from the digital printing machine board to avoid condensation of water droplets and cause short circuit of the board.

In fact, there is another coup to prevent static electricity. It is to connect a ground wire to the digital printing machine and bury it in the ground at a depth of not less than 2 meters. You can also pour salt water at the buried place to enhance conductivity.

3. The weather is dry in winter, and the static electricity and dust will cause great damage to the nozzle. If the static electricity is too large, it will easily damage the nozzle or circuit. Dust is easy to block the nozzle, causing the printed image to be disconnected.

Send Inquiry