Causes of nozzle failure of digital printing machine

Aug 11, 2023

Leave a message

Our common nozzle clogging is that ink accumulates to a certain extent and blocks the nozzle holes outside. Ink is a liquid that is easy to evaporate, and it is volatile in the air and becomes solid. The ink must evaporate into the air to make the picture dry. When the nozzle hole sprays on the cloth, there will always be some ink left around. This part of the ink will gradually make the nozzle hole smaller or even block the nozzle hole after drying in the air. .


The nozzles that are used for a long time, especially the factories that are not full of inkjet tasks and often shut down at night, will cause the ink to not flow in the nozzle for too long, and it is easy to be adsorbed on the internal filter screen or the wall of the ink channel, so that the flow of ink will be cut off. The smaller the area will also cause the ink to flow out of the nozzle.


The aging of the electronic components of the drive circuit and the accumulation of too much dry ink dirt may affect the voltage of the drive nozzle, resulting in no ink output from the nozzle or unstable ink output.

Send Inquiry