Four correct usage times for oval printing machine cleaning fluid

1. When installing a new machine
Since every machine has ink installed before it leaves the factory, there is also protective fluid in the pipes and ink heads. The solubility of the ink to the protective liquid is not as strong as the cleaning liquid, and the protective liquid has some influence on the fluidity of the ink. Stringing and oblique spraying of the ink holes often occur. Therefore, we require that when installing a new machine, cleaning fluid must be used to clean the pipelines. Avoid drawing and oblique spraying of ink holes.
2. Regular weekly maintenance
Use cleaning fluid to clean the blade and ink pad regularly every week. Purified water and alcohol have low solubility in ink, and alcohol has a slight corrosive effect on the scraper blade, so we recommend that you do not use purified water or alcohol for cleaning.
3. Regular pipeline cleaning
Regular use of cleaning fluid to clean the pipes is recommended (3-6 months). If you use ink for a long time, there will be attachments on the pipe wall, which will affect the smoothness of the ink. The cleaning fluid is very soluble in attachments, so the pipelines must be cleaned regularly.
4. When specific printing problems occur
Sometimes due to the poor working environment and strong static electricity on the machine, a lot of cotton-like dust will adhere to the surface of the ink head. If it is not cleaned for a long time, it will cause oblique spraying and blockage of the ink holes. Regularly drip cleaning fluid into the ink pad to make the ink head more moisturizing.