What maintenance matters need to be paid attention to for a fully automatic printing machine?

1. Daily maintenance
1. Operators should clean the machine regularly, including dust and oil on the surface of the machine, clean dust, debris, lint, etc. inside the machine and in various parts, and clean lubricating oil, oil pipes, etc., to ensure the hygiene and normal operation of the machine. .
2. Check whether the scraper rubber roller used in printing paint and the ink discharge port of the cloth winding machine are clean. If the ink is intermittent or jittering, they need to be cleaned. At the same time, attention should also be paid to keeping the working environment of the printing equipment clean and tidy, and reducing dust and dust to avoid affecting the printing effect.
3. Check whether the mechanical parts are fastened. If they are loose, they need to be tightened to prevent parts from falling and affecting the normal operation of the equipment.
4. Regularly check whether screws, terminals, etc. are loose to prevent dangerous situations such as short circuit or leakage. At the same time, attention should be paid to the use of safety card signs and regular maintenance and upkeep of the machine to ensure the personal safety of operators.
2. Lubrication and maintenance
1. Selection of lubricating oil: For fully automatic printing machines, the correct lubricating oil, grease and lubricant should be selected to ensure good lubrication effect and protect the equipment. The lubricating oil should be machine oil with good quality and wide temperature range, and should be replaced regularly.
2. Lubrication method: Regularly lubricate and maintain various mechanical components, bearings, transmission chains, guide wheels, etc., and add lubricating oil and grease regularly. At the same time, when cleaning equipment and replacing lubricating oil, lubrication procedures should be followed and operations should be carried out in strict accordance with the user manual to ensure that the service life of the machine is increased.
3. Maintenance
1. When performing troubleshooting and maintenance work on the equipment, the operator first needs to turn off the electrical switch of the equipment to ensure its safe operation. When inspecting, maintaining and maintaining equipment, it should be carried out under the guidance of professional and technical personnel and follow relevant safety operating procedures.
2. For maintenance and upkeep of machinery and equipment, it is necessary to follow the prescribed operating procedures and methods, check the movement of each component, whether it is opening and closing normally, whether the lubrication is sufficient, etc. Vibration and impact of machinery and equipment should be avoided as much as possible to reduce equipment damage.
3. For the replacement and maintenance of machinery and equipment and their accessories, original accessories and professional maintenance tools should be used as much as possible to ensure the reliability and stability of the equipment. Regularly replace the machine's wearing parts and make necessary adjustments.