Before unpacking the digital printing machine, the relevant packaging should be kept. Some small accessories are placed in the box and are very easy to lose. There are also some operating instructions, warranty sheets, etc. in the box, so it is recommended to place them properly. When digital printing requires changing the construction site, the original packaging must be used to protect it, and the digital printing machine must be positioned flat and not shake.
Like other mechanical equipment, digital printing machines have their own operating specifications and must strictly abide by relevant processes. For details, refer to the instruction manual or industry standards as a reference. To avoid accidents caused by improper operation, before working, check the printing test strip and check whether the nozzle is working normally. If the nozzle is abnormal, it is recommended to replace it and do not use it.
The relevant voltage and current must comply with the standards, and there should be no overload or overload. The internal precision chips of digital printing are relatively expensive, and the level of voltage will have a certain impact on them. The voltage of some companies is lower than the standard for digital printing, but the digital printing machine can still be turned on normally. In such a situation, the wire layout should be adjusted, the wires should be replaced, etc.
When using digital printing machines, you need to strictly abide by relevant regulations, which can prolong the use effect.
