1. Daily cleaning
Surface cleaning: Use a clean gauze or soft brush to remove dust and debris from the surface of the Elliptical Printing Machine. For stains that are difficult to remove, use a wet towel or sponge with an appropriate amount of clean water or a special detergent to wipe, but be careful to avoid moisture from seeping into the machine.
Conveyor belt and table cleaning: When cleaning the table glue on the table or guide belt, you should use a table glue that does not harm the guide belt, and try to avoid using highly corrosive detergents such as solvents to reduce damage to the guide belt.
2. Regular maintenance
Air source processor maintenance: The air needs to be shut off and drained twice a day to ensure the normal operation of the air source processor. At the same time, adjust the aerosol oil to 4-5 drops per minute, and turn off the air source when refueling.
Joint head and optical axis lubrication: The joint head can be lubricated with 10-20g of butter per week, and 1-2 drops of engine oil every 3 days. The optical axis (moving part of the machine) should be buttered twice a week to keep it running smoothly.
Check the parts: Check the parts of the Elliptical Printing Machine regularly, such as the bottom wheel, chain, timing belt, etc., to ensure that they are not damaged or loose. If any problems are found, they should be repaired or replaced in time.
Electrical system inspection: Check whether the electrical connection is firm and whether the wires are loose or in poor contact. At the same time, make sure to use special cables for electrical connections and follow the guidelines in the operation manual.
3. Precautions
Safe operation: When cleaning and maintaining the Elliptical Printing Machine, be sure to cut off the power supply and wait until the machine stops running completely before operating. At the same time, wear appropriate protective equipment such as gloves, goggles, etc. to protect your own safety.
Avoid misoperation: During operation, you should carefully read the operation manual and follow the relevant guidelines to avoid misoperation that may cause damage to the machine or personal injury.
Professional maintenance: For complex faults or problems that cannot be solved by yourself, you should contact professional maintenance personnel in time for maintenance.
