Everyone in the industry knows that oval printing machines have quickly occupied emerging markets with their common technical advantages and versatility. By now, people know that it is a good device, but few people know how to use it in detail to achieve messy prints in the printing market. Can the oval printing machine realize the mixed printing process? On this issue, I introduce the following printing technologies.
There are two advantages of pasting on the spot, one is to save time for other color printing in the future; second, if it is printed on dark fabrics, the on-site printing plate should be printed with elastic white and elastic white mixed, so that the printing of other colors is better. beautiful. In achieving this on-site printing, two ovens are used for fast drying. Foam printing, foam printing includes three methods of high foaming, low foaming and suede foaming. There are three points to note here. The color areas of the foam print need to be printed on the fabric. Do not print the underlying color. Put the foam printing plate after all printing plates as far as possible.
Introduction to the printing technology of oval printing machines. Now that they know their film-forming process, how to complete imitation imitation imitation heat-fix ink printing on oval printing machines? One thing we have to do is to print the cut parts before printing The printed part is pressed tightly. The paper that is about to be rolled out is flattened with a calender, and then the cut fibrous tissue is flattened, and then printed. The effect obtained after conjunctival printing is the same as that of glue, but its functions in all aspects are much better than glue, and the hand feel, wash fastness and color reproduction are not inferior.
Adhesive diamond pattern mixed printing, this kind of printing process should pay attention to, the hot melt adhesive after drilling should be ironed on the fabric fiber, otherwise the washing fastness is very low. Therefore, this requires us to reserve the position of the hot drill when printing, that is, to leave a round hole on the printed drawing according to the diameter of the drill. So let's not just take the cut piece off after printing all the colors, glue the drill drawing on it, and press it down. Then remove the slice and press the back of the slice for a good fastness.
Thick printing plates are printed with thermoset ink, which is a difficult machine printing process and can also reflect the advantages of printing presses. The printing process of the thick plate is completed by repeated overprinting of a printing plate. To do this process on the machine, we need to do it with two plates. At this time, we need to have a certain thickness on the printing plate, and the thickness of the photographic film should not be less than 0.5mm, so that the tension and angle of the two printing plates are consistent, so as to maintain the consistency of the two overprints.
