Printing machine maintenance work: If the printing machine nozzle is not used for a long time, it will cause the nozzle to be clogged. It is recommended to print the nozzle test strip every 3 days to check whether the nozzle is clogged. If it is clogged, perform the cleaning operation to keep the nozzle in good condition.
The temperature of the environment where the printing machine is stored should not be lower than zero, remind friends in the north to pay attention to the room temperature where the printing machine is located. If it is too low, it will cause great damage to the printing machine. ℃, the humidity is maintained at 35%-65%. Cover the printing machine with a dust cover to prevent dust from contaminating the equipment, and place it in a safe place to do a good job of preventing fire, water, theft, rodents, and insects to avoid damage to the equipment due to abnormal reasons.
Before starting the oval printing machine, ensure that the working environment of the equipment reaches a good temperature and humidity. The specific temperature is 15℃-30℃, and the humidity is 35%-65%. Please check the printing machine carefully to ensure that all parts are installed properly. After turning on the printer, print the print head test strip to check whether the print head is normal.
The pressure of the squeegee of the automatic printing machine can be adjusted at will. The engineer also made major improvements to the scraper frame and cylinder of the machine. Now this fully automatic printing machine can not only make the scraping and ink return of the scraper obvious, but also make it possible to adjust the pressure of the scraper at will. When printing on textiles with thick lines, we reduce the pressure of the squeegee to increase the amount of color leakage. When applying thin lines, we increase the pressure of the squeegee to reduce the amount of color leakage, and the thin lines will appear clearly.
