One: The application software system cannot be opened by double-clicking twice at the same time. Due to the exclusive use of the hardware by the system software, do not start the software again when the software is running, that is, start it twice in a row, otherwise the computer will freeze.
Two: Do not change the system time in the control software easily.
Three: Since the position movement of the control software requires a process, do not quickly click the two buttons to switch between Pavse and Continue, you should wait for one action to complete and then click the next action.
Four: Do not click other function keys in the application software during the printing process of the digital direct-injection printing machine.
Five: When the digital T-shirt printing machine is turned on, the power switch must be turned on first, and then the printer switch must be turned on, according to the order, and the reverse operation when the power is turned off.
Six: If the nozzle is found to be blocked during the operation of the digital T-shirt printing machine, you can press the pause button to clean it halfway, and continue printing after cleaning to observe the printing effect.
Seven: When the system software displays the parameters, check whether the settings are correct. Be sure to confirm the correct settings before printing.
Eight: The operator of the digital T-shirt printing machine must develop good working habits to maintain the nozzle of the digital printing machine every day, strictly maintain a good operating environment around the machine, and observe the temperature and humidity.
Nine: After the digital T-shirt printing machine is not working, clean the print head, cover the head with a damp cloth, and be sure to unplug the power supply after shutting down.
Ten: Always check the ink in the digital T-shirt printing machine ink cartridges and the ink status in the waste ink cartridges. It needs to be added in time. When the waste ink is full, it should be drained in time.
Eleven: Always check the cleaning and lubrication of the guide rails and guide rail balls of the digital T-shirt printing machine, and oil the guide rails in time.
Twelve: Check various circuit connectors, screws, etc. to observe whether there is looseness, and pay attention to adjusting the tightness of the timing belt.
Thirteen: Regularly remove dust from computers, power supplies and circuit boards. The bottom of the workshop is cleaned frequently and kept clean.
Fourteen: Responsible for keeping the original files of the digital printing machine (the manual, warranty card, purchase certificate, etc. of the digital T-shirt printing machine).
Fifteen: Develop good working habits, operate the digital T-shirt printing machine in strict accordance with the procedures, and prohibit illegal operations. Any illegal operations will be dealt with according to the standards stipulated by the company.
