How to maintain the automatic oval printing machine

Jun 15, 2021

Leave a message

First. Nozzle maintenance

1. If the power switch and the main power supply are not cut off, the digital printed circuit shall not be installed or disassembled;

2. Pay attention to the strength of your hands when replacing and fine-tuning the nozzle, and don't break it with brute force;

3. Clean the nozzle regularly;

4. Regularly replace the ink bag, such as Tito 8-head machine every 3 months;

5. Do not mix two different inks when printing;

6. After the nozzle is disassembled, it should be cleaned and placed in a special box to avoid dust and dirt pollution;

7. Do not use poor quality media. If the medium is too bad, it is easy to damage the nozzle;

8. Make a test strip before the end of each job, and make sure that all nozzles eject normally, as a daily operation.


Second. Keep the environment clean

1. The room should be dust-proof, not placed in an environment prone to smoke and dust, and the ground should be cleaned with a vacuum cleaner;

2. Try to maintain a constant temperature and humidity environment, generally the temperature is around 25℃, and the humidity is around 60%;

3. Keep the surface of the machine empty and do not place any objects, especially liquids;

4. There should be no ordinary household appliances near the machine, away from large magnetic and electric fields.


Third. Machine parts maintenance

1. Regular repairs and maintenance of some important parts, replacement of wear parts and timely repairs in case of failure;

2. Develop a good habit of checking every day, pay attention to the printing effect when printing, and solve the problem in time.


Send Inquiry