I. Guide Rail Straightness Inspection Methods
1. Level Gauge Inspection Method
Use a frame level gauge (accuracy 0.02/1000) to measure the straightness of the vertical surface of the guide rail in sections. Suitable for quick on-site inspection.
Note: Avoid direct sunlight on the level gauge to prevent temperature from affecting bubble stability.
2. Optical Straightness Measuring Instrument Inspection
High-precision inspection (±0.001mm), suitable for equipment with a stroke > 1.6 meters, requires operation by professional metrology personnel.
Can simultaneously detect straightness errors of both vertical and horizontal surfaces.
II. Guide Rail Surface Condition Inspection
1. Wear and Corrosion
Visually inspect the guide rail surface for scratches, dents, or rust spots. Smoothness directly affects printing accuracy.
Use a feeler gauge or 0.02mm thin paper to check the gap between the guide rail and the straight edge to determine local deformation.
2. Fixing Bracket Inspection
Confirm that the bracket bolts are not loose, and the flatness error of the guide rail joint should be < 0.05mm.
III. Dynamic Operation Verification
No-load operation test: Observe whether the screen moves smoothly; abnormal shaking may indicate guide rail wear or servo system misalignment.
Load test: Continuously monitor the registration error during printing. If the error exceeds the tolerance, the guide rails need to be recalibrated.

