1. Turn on the motor, check whether the washing device has been in working condition, whether the water valve has been opened, and whether the wiper on the guide belt is clean.
2. If you choose water-soluble patch glue, insert the glue pump inlet pipe into the glue bucket, connect the glue outlet pipe to the glue tank of the glue truck, connect the liquid level control line, put the switch in the forward position, and adjust the glue scraper. The magnetic force of the rod makes the thickness of the adhesive layer of the patch glue meet the printing requirements.
3. Start the cloth feeding motor, start the dust suction fan, adjust the position of the opposite side electro-mechanical eye, to ensure that the fabric enters the cloth press roller smoothly and accurately, and pay attention to whether the side suction device and the side opposite machine work normally.
4. Start the operation switch of the automatic printing machine, start the slurry pump switch, and inject the slurry inward.
5. Turn on the lifting switch of the grid frame to put the scraper into the working state, carry out the related flower alignment operation and magnetic adjustment according to the cloth sample, and check the working condition of the liquid level controller.
6. When the cloth enters the drying room, it is connected with the traction belt in the drying room when it enters the cloth rack.
