First: save labor. In the current situation where workers are unstable, the fully active elliptical printing machine highlights the greater advantages of less labor and quality and stability. The machine can combine the time spent by uncovering the film into the time spent by uncovering the film when there are not enough workers, so that the filming and uncovering can be operated at the same end. At this time, two people are required to operate.
Second: More power saving. Because we adopt electronic control, the energy-saving and safe power consumption of the whole machine is controlled at 5.0KW. How many pieces of electricity will be generated after printing, and the drying time will take a few seconds to be boring. For different pastes, printing areas, graphics, etc. Under the circumstances, the number and power of the lamps can be controlled at will to achieve energy saving and save every penny for the purchaser.
Third: safety. In the entire oval printing machine, except for the motor drying, which is 380 volts, all other electrical appliances are 24 volts. A 380 volt motor can be directly grounded, which is safe. In addition, the engineer installed a safety control switch on the corresponding part of the full-automatic printing machine. During the operation of the machine, if it exceeds the set scale, the machine will automatically stop until the fault is eliminated, and the machine can start and operate normally.
Fourth: It is convenient to load and unload the printing plate. According to the feedback and requirements of many printing factories, the machine adopts the method of positioning the two ends of the printing plate and positioning at three points up and down, which is the same as the manual printing. The four corners of the printing plate can be fixed by bolts. When unloading the printing plate, you need to loosen the four bolts and take off the printing plate. You do not need to re-register the plate next time, which is convenient for operation.
Fifth: Ink scraping and ink back of the squeegee. The pressure of the squeegee of the full-automatic printing machine can be adjusted at will. The engineer also made great improvements to the scraper frame and cylinder of the machine. Now this full-automatic printing machine can not only make the scraping and ink return of the scraper obvious, but also can adjust the pressure of the scraper at will. When printing on textiles with thick lines, we reduce the pressure of the squeegee and increase the amount of color leakage. When applying thin lines, we increase the pressure of the squeegee to reduce the amount of color leakage, and the thin lines will appear clearly.
