1. Preparation Test
Mount all print heads to the same cross-marking screen, with each print head corresponding to the same cross pattern position. Prepare continuous printing positions on a long piece of fabric/assembled test fabric, ensuring that each print head prints a unique cross in one pass.
2. Single Pass Test
Start the machine and run a full pass. Each print head will print its own cross mark on the test fabric in sequence.
After all print heads have completed printing, stop the machine, remove the test fabric, and compare the position of each cross.
3. Compare Positioning Deviations
Visual Judgment: After aligning the crosses, the cross that is significantly deviated from the group position corresponds to the deviation print head.
Precise Measurement: If the deviation is very small and difficult to distinguish with the naked eye, use calipers to measure the distance from each cross to the edge of the fabric. If the distance deviation exceeds 0.1mm, it is a problematic deviation print head.
4. Secondary Verification and Confirmation
After identifying the suspicious printhead, remove the other printheads individually and print with only the suspicious printhead for 10 consecutive times. Stop the machine each time to check the position of the printed pattern. If the position is inconsistent each time or deviates significantly from the baseline, it can be confirmed that this is the problematic printhead.
This method does not require disassembling the equipment; the print result directly identifies the issue, making it more efficient than checking each component individually. Even beginners can operate it.

