1. Printhead and nozzle: The printhead is one of the core components of the digital printing machine. It is necessary to use the machine's built-in cleaning function for periodic cleaning, and manually clean the printhead with a special cleaning agent.
2. Ink cartridge and ink supply system: Check the ink cartridge level, replenish or replace the ink cartridge in time, and clean the filter in the ink supply system to prevent impurities from clogging.
3. Waste ink system: including components such as waste ink bottles and flash spray tanks, which are used to collect waste ink generated during the printing process. Check the capacity of the waste ink bottle regularly, clean or replace it in time, and clean the waste ink in the flash spray tank.
4. Optical axis and other moving parts: The optical axis and other moving parts need to be lubricated to reduce wear. Use appropriate lubricating oil to lubricate the optical axis regularly and clean dust and impurities on the guide rails.
5. Electronic control system: including mainboard, sensor, etc. Check whether the circuit is damaged or aging in the power-off state, and check the working status of the sensor regularly.
6. Mechanical structure: including racks, transmission devices, etc., which need to be checked regularly to ensure stability and reliability. Check whether all connectors are firm, clean the surface of the machine, and remove dust and dirt.
7. Guide belt: Employees should not step on the guide belt when wearing cloth to avoid sticking to sharp objects and scratching the guide belt. The guide belt should be cleaned and checked for damage before each shift.
8. Machine: Clean the slurry splashed on the work surface at any time, ensure that it is scrubbed once per shift, and clean the belt rollers on both sides of the drying.
9. Lifting frame box parts: Operators should not kick the box with their feet when aligning the board, and scrub the slurry splashed on the box every shift.
10. Trolley parts: Pay attention to the sound of each trolley, whether there is any abnormal sound, and the use of the synchronous belt and drive shaft.
11. Washing and drying parts: Clean the hair scraps in the washing brush roller every shift, clean the debris in the sink, and clean the hair scraps on the dryer vent filter every shift.
12. Penetration parts: Clean once a day, especially the scraps on the scraper mouth, to ensure that the steel rubber roller is separated when not penetrating.
