Analysis of the technical advantages of automatic printing machine

Apr 13, 2022

Leave a message

1. Under the current situation of unstable workers, the automatic printing machine highlights the great advantages of less labor and stable quality. When there are enough workers, it can be operated by 3 people, 1 for spreading, 1 for unmasking, and 1 for adding slurry. When there are not enough workers, the fully automatic printing machine can combine the time spent in unpacking into the time spent in spreading, so that spreading and unpacking can be operated at the same end. So this fully automatic oval printing machine can be operated by two people.

2. The automatic printing machine is extremely power-saving. Because we adopt private server control, the power consumption of the whole machine is 4.5KW for energy saving and safety (6 colors as an example). The surface is dry. According to different paste, printing area, graphics, etc., the number and power of lamps can be controlled at will. To achieve energy-saving effect, save every penny for the enterprise.

3. Safe and reliable. In the entire printing machine, except for electricity and machine drying, which are 380 volts, all other electrical appliances are 24 volts. The standard safe voltage for our human body is 36 volts, and 24 volts is safe for workers. The 380-volt motor can be directly grounded, and its safety has been guaranteed. In addition, in the corresponding part of the automatic printing machine, the machine is equipped with a safety control switch. During the operation of the machine, if the setting range is exceeded, the machine will automatically stop, until the fault is eliminated, the machine can start and run normally.

4. It is convenient to load and unload the printing plate. Since the manufacturer of the printing machine absorbs the experience of using the machine in many printing factories, when manufacturing the machine, he knows what the printing factory has for the loading and unloading of the printing plate of the automatic printing machine. They require easy loading and unloading of printing plates without affecting their printing accuracy. Therefore, according to the requirements of the printing factory, the machine adopts the method of positioning both ends of the printing plate, and positioning the upper and lower three points. Like manual plate-laying printing, you only need to place the printing plate in a fixed position according to the method set by the machine, and use four The four corners of the printing plate can be fixed with four bolts. It is also convenient to unload the printing plate. You only need to loosen the four bolts and remove the printing plate. The next time you print, you do not need to re-register the plate, and the operation is convenient.

5. The pressure of the scraper can be adjusted at will for the scraping and ink return of the scraper. Considering the large investment in purchasing a large-scale automatic printing machine, the pressure of the squeegee cannot be adjusted arbitrarily, and it can only print textiles with thick lines. If it is required to print thin lines, the machine cannot be used or the use effect is not good. Therefore, the machine has made great improvements to the scraper frame and cylinder, and made great efforts. Now this fully automatic printing machine can not only make the scraping and ink return of the scraper obvious, but also can adjust the pressure of the scraper at will. When printing on textiles with thick lines, we turn down the squeegee pressure to increase the amount of color leakage. When applying thin lines, we increase the pressure of the scraper to reduce the amount of color leakage, and the thin lines will appear clearly.

6. The cutting area is large, and it is difficult for one person to pave it by hand. In response to this problem, a distance of 50 cm is left in the middle of the machine, one person is inside and one person is outside, and the cloth is spread for large pieces of cloth. The simultaneous laying of two people is not only fast, but also effective.

7. Affordable and durable. For the benefit of the printing factory, the materials of this machine are exquisite, and most of the parts are general accessories of the printing machine, so that the machine is durable during operation. Generally, there is no need to replace the parts, and it can be maintained normally according to the instructions.

8. Easy maintenance. This fully automatic printing machine adopts PLC control. Since the lamp tube is a wearing part (with a warranty of 8000 hours), it is a product, and it is very convenient to purchase and replace. On the whole, whether it is the mechanical part or the electrical part, its accessories are universal, so that once the machine fails, it is convenient to maintain.


Send Inquiry